PF Press

Furnace designed to fire all products for ceramic restorations: conventional porcelains at medium and low melting temperatures and feldspar, glass, lithium disilicate-based ceramics, stratified on metal, zirconia or complete ceramic systems.

The assorted programs available as well as the accurate execution of the baking cycle ensure top performance results that are constantly repeatable over time.

It comes complete with:
– a practical and intuitive user interface
– multiturn encoder allowing a wide choice of freely programmable working parameters
– large graphic display showing all the cycle essential data
– latest generation quartz heating muffle
– innovative injection system from the bottom; all functions are programmable

The standard configuration includes the dry vacuum pump.

CHARACTERISTICS

• 16-bit microprocessor
• Programmable and upgradeable flash memory
• 80 programs available for firing conventional ceramics
• 20 special programs for pressing technique
• Total freedom of choice in the programming stage, all functions are adjustable according to the user requirements
• Drying stage with the flask either open or closed
• Ability of cycles with two temperature thresholds, specific to the processing of milled lithium disilicate
• Vacuum level regulation
• Different cooling modes, even very slow in a closed chamber
• Latest generation muffle with quartz-filtered radiation for the full exploitation of the infrared rays
• Does not require periodic calibration
• Silicone casting ring kit and special bases for pressing technique
• Maximum temperature: 1200° C
• Power: 1200W
• Voltage: 220V@60Hz (also available in 110V@60Hz upon request)
  
  

Ceramic injection occurs by means of a compressed air-driven piston that operates from the bottom upwards in an operational mode that makes this furnace unique compared to other models on the market. Pressure and speed values can be adjusted electronically and are shown on the wide, easy-to-read display. The porcelain furnace has then to be connected to the laboratory compressed air installation.

• Muffle size: Ø90x55H
• Overall dimensions (mm): 390x440x490h

Technical Data Sheet

Instruction Manual